1969 C3 Chevrolet Corvette: Specifications, VIN, & Options (2024)

1969 C3 Chevrolet Corvette: Specifications, VIN, & Options (1)

Model & Generation

1969 Corvette (C3)

Body Type

2 Door Coupe & Convertible

VIN Range

194379S700001 - 194379S738762

Original Price

$4,781 (Coupe), $4,438 (Convertible)


350ci- 300HP Engine (standard), 350ci- 350HP Engine,427ci- 390HP Engine,427ci -400HP Engine,427ci - 430HP Engine, 427ci- 435HP Engine


3-speed manual (standard),4-speed manual (optional),3-speed Turbo Hydra-Matic automatic (optional)

More Research

C3 Generation Research Hub

1968 Model Year Hub

1968 Technical Research

C3 Corvette for Sale

1969 Corvette – The Ultimate Guide

The 1969 Chevy Corvette arrived on the coattails of critics who had been anything but kind to the inaugural C3 Corvette just the year before. Although the overall tone of the critics was marginally more positive by the end of the 1968 model year, GM recognized that there was still a way to go to fully win over the same people who were so quick to tear the Corvette apart.

Still, critics had appreciated some of the design changes that had been made in the third-generation Corvette over the earlier C2’s, even though the second-generation Corvettes had been so well-loved and so widely received. For one, the 1968 Corvette had featured stiffer springs, and been fitted with wider wheels that had improved handling. For another, Chevrolet had made the right decision to replace the old Powerglide automatic transmission with the vastly superior Turbo Hydra-Matic.

Still, there were items that needed to be addressed. So it was that the changes that were to be made to the 1969 Corvette would preclude any real new improvements for design sake, but would instead resolve the “unanswered criticisms” of the 1968 Corvette. As is common in automotive manufacturing, the sophom*ore model of any production vehicle is often a carryover from its inaugural year, with the changes occurring to correct for errors in the initial design – errors that are often identified as the result of feedback from both the automotive media and consumers alike. This was definitely the case for the 1969 Corvette.

The exterior alterations were mostly minor, with one obvious exception – the return of the Stingray designation (now one word instead of the former “Sting Ray” found on Second-Generation Corvettes) over the car’s front-fender louvers. The all-welded, 5-cross member, ladder-type, steel-reinforced frame was “stiffened” in an effort to reduce body shake and vibration. The exterior door handles were changed from the conventional door grip with thumb button to a single-piece door lever that was depressed as the door was gripped during opening.

A new headlight washer system was introduced and the windshield washer jets were relocated to the wiper arms. The hidden wiper system, which allowed the wiper blades to be concealed when not in use, was further complicated for the 1969 model year when engineers introduced an override switch to the system that allowed the vacuum-operated panel to be left up during freeze conditions.

At the opposite end of the vehicle, the previously separate back/taillight assemblies were incorporated into a single lens which resided in the inboard taillight lamp assembly. Additionally, a trunk rack was supplied to consumers who wanted it to increase the Corvette’s luggage carrying capacity, but utilizing the rack with any kind of luggage reduced the driver’s rear vision to zero. Further, the image of a luggage rack went directly “in the face” of the

1969 C3 Chevrolet Corvette: Specifications, VIN, & Options (2)

un-noticed by critics. The wheels were again increased in size – from 7 inches to 8 inches. Lastly, optional side mount exhaust pipes (RPO N14) and side fender chrome vent trim inserts (RPO TJ2) were introduced which, like the Stingray nameplate, were probably the only other notable characteristics that would help differentiate the 1968 and 1969 model years.

Like the 1968 Corvette before it, the 1969 Corvette also featured a number of standard body features – the most obvious being the same corrosion-proof fiberglass body that had been a trademark of the Corvette since Harley Earl envisioned used FRP (Fiber-Reinforced Plastic)/fiberglass on the 1953 prototype. It also featured steel-reinforced body sills, door hinge pillars and lock pillars, plus lateral steel cross-member integrating front pillars.

The coupe also featured supporting members that enclosed the passenger compartment with protective steel framing. All of this structural steel was specifically laid out to ensure that the occupants of the Corvette were well protected, even when thethe drivers were “exposed”. The Corvette convertible added the additional amenity of a fold down top that stowed away beneath a double-locking, spring-loaded cover panel.

1969 C3 Chevrolet Corvette: Specifications, VIN, & Options (3)

The interior received a number of minor, but significant changes. First, a new, smaller steering wheel was introduced, trimmed back an inch for more under-rim thigh clearance. Interior door handles and control knobs were redesigned to improve upon safety.

The ignition switch, which had been mounted on the dashboard since Corvette’s inception in 1953, was moved to the steering column for the 1969 model year, where it combined with the newly mandated column lock for additional security.

Elsewhere, a warning light was added to inform drivers if the pop-up headlights hadn’t opened completely. The Astro-Ventilation System, which had been introduced as part of the 1968 Corvette, airflow through the car’s co*ckpit, though the volume of air it produced continued to be inadequate. A flexible dash mounted three-section map pocket was included to help make up for the lack of a proper glovebox.

Lastly, Zora Arkus-Duntov had pushed through a $120,000 tooling change that opened up the inner door panels a half-inch per side, allowing occupants additional shoulder space.

1969 C3 Chevrolet Corvette: Specifications, VIN, & Options (4)

Interestingly, there was one optional interior item that changed for the 1969 model year. The driver and passenger seats had been designed with a headrest that had been listed as an option, albeit a mandatory option (RPO A82) in 1968.

While the A82 option became a standard feature on the Corvette on January 1, 1969, General Motors records also indicate that the option could also be deleted when ordering a Corvette. Had any consumer request the deletion, GM would have issued a credit in the amount of $17.95. However, all records indicate that every Corvette built in 1969 included the headrest option.

All 1969 Corvette interiors continued to feature a reasonably-sized luggage compartment behind the front driver and passenger seats with a concealed storage space which was ideal for storing tools, or other small valuables. To ensure that luggage shift did not injure or annoy vehicle occupants, the new Corvette also featured a vertical riser that protected/shielded seatbacks from possible luggage damage.

Beyond those referenced above, the 1969 Corvette featured an extensive array of additional safety features specifically designed to protect both the occupants of the car as well as the car itself. In the event that the Corvette were to be involved in a collision, engineers had equipped the new Sting Ray with an energy-absorbing steering column, seat and shoulder belt restraints, an energy absorbing instrument panel, padded sunvisors and a reduced-glare instrument panel for improved visibility during night driving. To protect the car when its occupants were absent, an anti-theft ignition system was installed featuring anti-theft steering and transmission locks, and an anti-theft ignition key warning buzzer that would sound whenever the keys were left in the ignition cylinder.

While aesthetics and safety were being improved upon by the Corvette’s body designers, its mechanical engineers were likewise making alterations to the car’s engine and drivetrain assemblies. While some of these changes were directed by the aforementioned feedback that Chevrolet had received on the 1968 model, many others were the direct result of the federally mandated emissions control standards that had been introduced the previous model year.

Still, even Federal regulations did not prevent Corvette engineers from enhancing the power output from the variety of engines that were made available to it.

The Chevy small-block was stroked approximately a quarter inch to 3.48 inches, which boosted the engine displacement from 327 to 350 cubic inches on the same 4.00 inch bore. For the 1969 model year, the 350 cubic engine was offered in both a 300- and 350-BHP (Brake Horsepower) versions – which were the same ratings as the 1968 Corvette small block offerings, though the new engines saw a drop in compression.

The 300 horsepower engine now operated at a compression ratio of 10.25:1 and the 350 horsepower at 11.0:1. Additionally, each engine’s peak power engine speed was lowered by approximately 200rpm, to 4,800 and 5,600 respectively.

All four versions of the 427 cubic inch big block engine remained the same for 1969 as in previous years, with power ratings of 390 to 435 horsepower.Even the high end, aluminum-head L88 engine was again made available as an option – and was again rated at a respectable 430 horsepower, though its staggering price of $1,032 was not inviting to consumers, and only 116 units were sold for the model year.Despite the cost prohibitive nature of the L88, the 427 cubic inch engines as a whole were widely recognized as a worthwhile investment and accounted for more than half of all the Corvettetriple, two-barrel Holley carburetors, a Muncie manual gearbox and a 3.55:1 rear axle ratio, the 435 horsepower 427C.I.Corvette could accelerate from zero to sixty in less than six seconds and could manage a quarter mile in under fourteen seconds.

1969 C3 Chevrolet Corvette: Specifications, VIN, & Options (5)

Despite these impressive performance numbers (for its time), there were two new performance options for 1969 that further improved Corvettes performance.

The first was an entirely new big-block engine option which was even more powerful than anything that had come before it. Designed RPO ZL1, this production option fitted the 1969 Corvette with an all-aluminum 427C.I. engine block that featured dry-sump lubrication and weighed 100 pounds less than the L-88 engine.

This ultra-high-performance 427C.I. engine was developed by McLaren for use in the SCCA’s Canadian-American Challenge Cup Series racing, and was rated somewhere between 560 and 585 brake horsepower, although therating was denoted as the 430-bhp rating as the L88 engine.

The engine, simply put, was “a racing mill let loose on the street.” The ZL1 engine option, while impressive, was also prohibitively expensive, raising the price of a “standard” Corvette by nearly 60 percent – from around $5,000 to $8,000 per car. Because of the sticker shock to most consumers, only two Corvettes ever left the factory equipped with this option.

1969 C3 Chevrolet Corvette: Specifications, VIN, & Options (6)

Even though the ZL1 engine never really saw much use in the street variant of the Corvette, the story behind its evolution is nonetheless an interesting one, and certainly a significant milestone in the development of the Corvette as both a high-performance street vehicle and a race car.

It’s very evolution skirted on violating the AMA (Automobile Manufacturers Association) racing ban that Chevrolet had openly participated in since 1957.

However, Chevrolet’s Performance Products Chief Vince Piggins had begun lobbying for an all-aluminum big-block engine in 1968, with the intention of supporting, among others, Bruce McLaren’s successful Canadian-American (Can-Am) Challenge Cup team.

Afterall, small-block Chevy-powered McLaren racers had begun their domination of the Can-Am series in 1967.

When Chevrolet failed to meet the demands of developing a big-block variant for the racers, McLaren threatened to look to Ford for a comparable lightweight big block to power his 1968 Can-Am cars. Piggins stepped in, using the leverage that Ford could – and would – produce a big-block engine that would replace the Chevy small blocks. The rest is history. Ironically, now armed with the ZL1 engine, McLaren dominated all Can-Am racers from 1968 to 1971, winning 32 of the 37 racing events held during that time period.

1969 C3 Chevrolet Corvette: Specifications, VIN, & Options (7)

The second performance option that was developed was listed as an option in 1969, though it did not become available until 1970 as a direct result of development and manufacturing problems.

Zora Duntov, who had always been a proponent of extracting horsepower out of any engine, had returned to work on the small-block, and the result was a special solid-lifter version of the new, 350 cubic inch engine.

The engine, which was listed as RPO LT1, was the genesis of Duntov’s longtime goal of minimizing weight in a performance car that continuously grew heavier with every new creature comfort that was added to its design. Unlike other small block engines, the LT1 had more radical camoverlap.

It utilized the big-block engines hefty 2.5-inch-diameter exhaust system, and was fed through the same 860-cfm Holley carburetor that had been fitted to the L88/ZL1 big blocks. The resulting engine produced 370 horsepower at 6,000 rpm and 380 ft-lb of torque at 4000 rpm.

The LT1 could only be ordered with a four-speed manual transmission. When equipped, the Corvette was capable of running a quarter mile from a standing start in approximately 14.2 seconds at a speed of 102 miles per hour. A Corvette equipped with this option was only identifiable by its special domed hood, which featured perimeter striping and discreet “LT1” lettering. However, the visual identifiers were unnecessary. One had only to listen to the distinct rap-rap sound coming from the exhaust or the equally distinct tapping of the mechanical lifters.

1969 C3 Chevrolet Corvette: Specifications, VIN, & Options (8)

Just as the engine lineup for the 1969 Corvette was (with the noted exceptions above) a carry-over from the 1968 model year, so too was the transmission lineup being offered to consumers. In fact, all the transmissions were identical to those offered in 1968 with one exception – the Turbo Hydra-Matic (PRO M40) became available behind the two solid-lifter 427 cubic inch engines. When ordered with the base model 350 cubic inch engine, the M40 Hydra-Matic transmission was priced at $221.80.

However, when ordered with either the L71 or L88 engines, it cost $290.40. The variant in the transmissions (and their respective prices) comes from the setup of the transmission shift points. As stated in Car Life’s July 1969 issue, “In the wild engines, the transmission stays in the lower gear until the driver lifts his foot, right up to the redline.

In the milder engines, the M40 is set to shift up quickly.” Of the 116 L88 Corvettes that were built in 1969, 17 of them featured the Turbo Hydra-matic transmission.

Between the improvements made to all of the small block engines, the power and performance of the extensive array of big block engines, and the appeal of the ZL1 and LT1 engines enticing consumers and critics alike to give Corvette a more serious look, there were few who had anything negative to say about the new GM powertrains being offered. In fact, even the critics at Car & Driver Magazine now felt the car was worth giving a serious look, despite comments only a year earlier that the car was “too tacky to test.” The critics at Car & Driver felt that the 1969 Corvette offered an interesting problem for prospective owners to ponder: “The small-engine Corvettes are marginally fast and extraordinarily engine Corvettes are extraordinarily fast and marginally comfortable.” The question became which would consumers choose?

DID YOU KNOW: On November 7, 1969, the 250,000th Corvette came off the production line. Also for 1969, the “Shark” once more became a Stingray (though spelled as one word instead of “Sting Ray” as had been seen on the second generation Corvettes). The revised spelling was actually a throwback to the spelling Bill Mitchell had originally used for his 1959-1960 Stingray race car.

The answer would come with sales numbers that were literally off the charts for any Corvette that had come before the 1969 model year.

1969 C3 Chevrolet Corvette: Specifications, VIN, & Options (9)

Despite the improvements that were made to the 1969 Corvette, some critics continued to take issue with the Stingrays “dismal build quality, styling eccentricities, and overall lack of finesse.”

One other notable Corvette that emerged – or, better said, evolved – in 1969, was the Manta Ray show car. The Manta Ray was actually the evolution of Bill Mitchell’s Mako Shark II, which had toured on the auto show circuit during the development of the C3 Corvette before serving time as Bill Mitchell’s personal vehicle. Already measuring roughly 9 inches longer than a standard Stingray, the Mako Shark’s length grew even more after the Manta Ray conversion took place. The additional length came during the Mako Shark’s transformation, when the car’s tail was restyled and stretched to create a tapered look when viewed in profile perspective.

Exterior FeaturesInterior Features
White lenses over amber parking/direction signal lights
Special high-domed hood (427 V8 engine only)
Bright license plate frame
Functional font fender louvers
Hide-A-Way windshield wipers with built-in washers
Full door-glass styling
Rectangular outside rearview mirror
Wide-oval F70 x 15 tires and 15 x 8 wheels
Body sill moldings
Wheel trim rings and center caps
Side marker lights – front and rear
Bright roof drip and rear window molding (Sport Coupe only)
Flush-mounted door handles
Removable roof panels and rear window (Sports Coupe only)
Astro Ventilation outlet grilles on rear deck
Luxurious all-vinyl bucket seat interior
Sport-styled steering wheel with black rim and horn button
Astro Ventilation system with adjustable vent-ports on instrument panel
Convenient aircraft-type center console
7000-rpm tachometer
Trip odometer
Ammeter, temperature, fuel and oil pressure gauges
Light monitoring system alert panels
Seat belt, door ajar and headlight position indicators
Electric clock
Molded door panels with built-in armrests
Door pull handles
Extra-thick foam seat cushions
Special bright pedal trim
Courtesy light with automatic door switches
Cigarette lighter in ashtray on console
Color-keyed deep-twist carpeting
Carpeted stowage compartment behind seats
Fitted stowage cover for removable roof panels… plus all Corvette standard convenience and security features

The point of the car’s tail was protected by a body-colored Endura bumper. Elsewhere on the car, updates included a chin spoiler on the front end and a repaint that minimized the shark shading that had been so prevalent on the Shark II. Sidepipes were eventually added, as were small mirrors mounted up high on the windshield pillars. However, the biggest changeused to replace the Shark II’s iron-block 427. The new power source was none other than Chevrolet’s all-aluminum ZL1 engine, a one-of-a-kind engine that was matched to a one-of-a-kind Corvette. When finished, estimates indicate that the Manta Ray show car’s development and transformation may have cost as much as $3 million dollars to complete, a number that, while still impressive today, was unimaginably expensive in 1969.

Production Volumes

Criticisms of the 1969 Corvette did nothing to deter consumers from purchasing it. In 1969, sales took a vertical leap, increasing by more than 10,000 units to a total of 38,762 Corvettes sold that year.Of those sold, 22,129 were coupes, which had a base price of $4,781. The convertibles, on the other hand, accounted for 16,633 units with a base price of $4,438. It was a Corvette sales record that would not be topped again until 1976, although some argue that the only reason that the 1969’s sales numbers were as high as they were was the result of a UAW (United Auto Workers) strike which forced a two-month extension of the 1969 production run into the start of the 1970 model year. More details on the production volumes for 1969 here.

1969 Corvette Specifications & Performance

See the complete breakdown of technical specifications for the 1969 Corvette, including engine, suspension, brakes, body dimensions, and power. Read more at 1969 Corvette Specifications.

Engine & Transmission

Though the base Corvette got a larger engine this year, standard horsepower did not change and stayed at 300. Buyers did have a choice, however, of a modified version of the 350 CID V8 that upped horsepower to 350.The rest of the engine choices were the 427 CID big-block V8, and there were four versions to choose from. Two were single 4-barrel versions that produced 390 and 400 horsepower, and two were the 3×2-barrel engines that had been introduced in 1966. The latter were officially rated at 430 and 435 horsepower.And technically, that aforementioned ZL-1 engine was a fifth version of the 427, however with its all-aluminum build it was about 25 pounds lighter than even the small-block. The engine was technically rated at 430 horsepower, but because of a slew of modifications around the car, most experts feel the actual horsepower number pushed 600.Read more:1969 Corvette Engine and Specs.


Hot Rod magazine tested the 1969 Corvette with the 427ci/430hp engine and managed a 13.6 sec @ 111.1 mph quarter mile, while Motor Trend tested the 427ci/460hp and got that down to 10.9 sec @ 130.0 mph.Read more:1969 Corvette Performance

1969 Corvette Vehicle Identification Numbers (VIN)

The last six digits begin at 700001 and run through 738762, accounting for all 38,762 Corvette Coupes/Convertibles built in 1969. Each Vehicle Identification Number (VIN) is unique to an individual car. For all 1969 Corvettes, the location of the Vehicle Identification Number (VIN) is stamped on a plate attached to the left front body hinge pillar. (See Figure 1 below.) Read more: 1969 Corvette VINs.

1969 Corvette Price & Options

Core Features & Factory Options

Stung by the criticism of the 1968 Corvette, Chevrolet worked hard to resolve the problems for the 1969 model year. Various quality control and build problems were addressed wherever possible. The door panels were redesigned to recover some interior room. Overall fit and finish improved. The 250,000th Corvette was built in November 1969.

The ignition key moved from its 1968 location on the dash near the upper right corner of the tachometer to the steering column in response to new anti-theft regulations. Power steering had become popular with a majority of Corvettes so equipped in 1969. There was also a smaller steering wheel to increase under wheel leg-room.

Engine choices for 1969 were mostly the same with the popular 427 cu. in. 435 hp engine still the king of the hill. The 327 cubic inch engine, first seen in 1962, was dropped in favor of the 350 cubic inch as the standard (300 horsepower) and the optional 350 cubic inch 350 horsepower (RPO L46; $131.65) engines. Two of the engines offered – the L88 and ZL1 – were racing engines not practical for street use.


Exterior colors for the 1969 model year Corvette included Tuxedo Black, Can-Am White, Monza Red, LeMans Blue, Riverside Gold, Fathom Green, Daytona Yellow, Cortez Silver, Burgundy and Monaco Orange. Learn more about the 1969 Corvette colors here.

Pricing & Options

The Base Corvette Coupe with 350 cu. in. 300 hp engine and three speed manual transmission had a base price of $4,781, while theBase Corvette Convertible with 350 cu. in. 300 hp engine and three speed manual transmission came in at $4,438.

19437Base Corvette Sport Coupe22,129$4,781.00
19467Base Corvette Convertible16,633$4,781.00
Genuine Leather Seats3,729$4,438.00
A01Soft Ray Tinted Glass, All Windows31,270$79.00
A31Power Windows9,816$16.90
A85Custom Shoulder Belts (std. with coupe)600$17.95
C07Auxiliary Hardtop (for convertible)7,878$42.15
C08Vinyl Covering (for auxiliary hardtop)3,266$252.80
C50Rear Window Defroster (Coupe only)2,485$57.95
C60Air Conditioning11,859$32.65
F41Special Front and Rear Suspension1,661$428.70
G81Positraction Rear Axle, all ratios36,965$36.90
J50Power Brakes16,876$46.35
J56Special Heavy Duty Brakes115$42.15
K05Engine Block Heater824$384.45
K66Transistor Ignition System5,702$10.55
L36427 Cubic Inches, 390 Horsepower Engine10,531$81.10
L46427 Cubic Inches, 350 Horsepower Engine12,846$221.20
L68427 Cubic Inches, 400 Horsepower Engine2,072131.65
L71427 Cubic Inches, 435 Horsepower Engine2,722$326.55
L88427 Cubic Inches, 430 Horsepower Engine116$437.10
L89Aluminum Cylinder Heads with L71390$1,32.15
MA6Heavy Duty Clutch102$832.05
M204-Speed Manual Transmission16,507$79.00
M214-Speed Manual Transmission, close ratio13,741$184.80
M224-Speed Manual Transmission, close ratio, heavy-duty101$184.80
M40Turbo Hydra-Matic Automatic Transmission8,161$290.40
N14Side Mount Exhaust System4,355$221.80
N37Tilt-Telescopic Steering Column10,325$147.45
N40Power Steering22,866$84.30
P02Deluxe Wheel Covers8,073$105.35
PT6Red Stripe Tires, F70x15, nylon5,210$57.95
PT7White Stripe Tires, F70x15, nylon21,379$31.30
PU9White Letter Tires, F70x15, nylon2,398$31.30
TJ2Front Fender Louver Trim11,962$33.15
UA6Alarm System12,436$21.10
U15Speed Warning Indicator3,561$26.35
U69AM-FM Radio33,871$11.60
U79AM-FM Radio, stereo4,114$172.75
ZL1Special L88 (aluminum block)2$4,718.00

Read more:1969 Corvette pricing and factory options.

1969 Corvette Gallery

On the outside, perhaps the most prominent change was the addition of the “Stingray” emblem on the sides of the car. Another way to distinguish between a 1968 and 1969 models were the single-lever handles instead of the thumb-operated chrome handles of the past.See full1969 CorvetteImage Gallery.

1969 C3 Chevrolet Corvette: Specifications, VIN, & Options (2024)
Top Articles
Latest Posts
Article information

Author: Nicola Considine CPA

Last Updated:

Views: 5694

Rating: 4.9 / 5 (49 voted)

Reviews: 80% of readers found this page helpful

Author information

Name: Nicola Considine CPA

Birthday: 1993-02-26

Address: 3809 Clinton Inlet, East Aleisha, UT 46318-2392

Phone: +2681424145499

Job: Government Technician

Hobby: Calligraphy, Lego building, Worldbuilding, Shooting, Bird watching, Shopping, Cooking

Introduction: My name is Nicola Considine CPA, I am a determined, witty, powerful, brainy, open, smiling, proud person who loves writing and wants to share my knowledge and understanding with you.